Central Hydraulics 94143 Manual

A SERVICE OF

next previous

SKU 94143 For technical questions, please call 1-800-444-3353 PAGE 10

Locate the RED Snap-In Plug (+) in the Wiring Harness. Then connect the RED 2.

Snap-In Plug to the BLACK Snap-in Receptacle extending from under the En-

gine’s (15) Gas Tank. (See Figure D.)

To Attach The Auger Coupler:

HYDRAULIC MOTOR (4)

AUGER COUPLER (59)

INSERT HERE

HITCH PIN (57)

HITCH PIN (57)

FIGURE E

MOTOR PIVOT BRACKET (58)

1. Locate the end of the Auger Coupler (59) with two holes. This is the end of the

Auger Coupler that points up into the Hydraulic Motor (4). (See Figure E.)

Slide the Auger Coupler (59) into the Hydraulic Motor (4), and lock the Auger 2.

Coupler in place, using one Hitch Pin (57). (See Figure E.)

Insert one Hitch Pin (57) into the Motor Pivot Bracket (58). This Hitch Pin will be 3.

used when moving and towing the Auger. (See Figure E.)