Sampling a Sound and Playing it on the Keyboard (Sampling)
EN-14
Use the procedure below to apply effects to a sample that was recorded using either long sampling or short sampling.
1.
Press one of the five
bq
-
ck
(SAMPLED TONES/EFFECTS) buttons to cycle through available effects.
Example: Button 1 (tone number 412)
Original tone 3 Loop 1 3 Loop 2 3 Original tone 3
See the “Sampled Sound Tone Numbers” table below for details about the effects that are assigned to each button.
■Sampled Sound Tone Numbers
The original sampled sound and its modified (by effects) versions are assigned to sequential tone numbers (the same as built-
in tones). This makes it easy to select a version of a sampled sound using
bp
(10-key).
Applying an Effect to a Sound Sample
SAMPLED TONES/
EFFECTS button
Tone No. Effect Name Description
1
401 Original Long –
402 Loop 1 Long Loops the sampled sound.
403 Loop 2 Long
Loops the sample sound and raises the pitch of the resonating sound when
the keyboard key is released.
2
404 Loop 3 Long
Loops the sample sound and lowers the pitch of the resonating sound when
the keyboard key is released.
405 Pitch 1 Long Changes the pitch from low to high, at an increasing rate.
3
406 Pitch 2 Long Changes pitch from high to low, at a decreasing rate.
407 Pitch 3 Long
Changes pitch from high to low, at a decreasing rate, and then raises the
pitch when the key is released.
4
408 Tremolo Long Alternates volume between high and low.
409 Funny 1 Long Adds vibrato and changes pitch by a gradually increasing amount.
5
410 Funny 2 Long Alternates between high pitch and low pitch.
411 Funny 3 Long Adds vibrato and changes pitch from low to high.
1
412 Original Short 1 –
413 Loop 1 Short 1 Loops the sampled sound.
414 Loop 2 Short 1
Loops the sample sound and raises the pitch of the resonating sound when
the keyboard key is released.
2
415 Original Short 2 –
416 Loop 3 Short 2
Loops the sample sound and lowers the pitch of the resonating sound when
the keyboard key is released.
417 Pitch 1 Short 2 Changes the pitch from low to high, at an increasing rate.
3
418 Original Short 3 –
419 Pitch 2 Short 3 Changes pitch from high to low, at a decreasing rate.
420 Pitch 3 Short 3
Changes pitch from high to low, at a decreasing rate, and then raises the
pitch when the key is released.
4
421 Original Short 4 –
422 Tremolo Short 4 Alternates volume between high and low.
423 Funny 1 Short 4 Adds vibrato and changes pitch by a gradually increasing amount.
5
424 Original Short 5 –
425 Funny 2 Short 5 Alternates between high pitch and low pitch.
426 Funny 3 Short 5 Adds vibrato and changes pitch from low to high.
CTK2400_A5_x1a_EN_ES.indd 16 2014/02/10 19:12:51
