87
H
I
J
6
1 Preparation
1. Press the ON button to turn off the machine.
2. Make sure that the
POWER lamp (J) is not lit.
Operating noise may continue for up to 40 seconds until the machine turns off.
When removing the power plug, make sure that the POWER lamp is
not lit before removing the plug. Removing the power plug while the
POWERlamplightsuporashesmaycausedryingandcloggingof
the Print Head, resulting in poor printing.
•
Be sure to follow the procedure below.
When the above screen is displayed, touch the OK button and go to the
next step.
Use the { or } button (H) on the Operation Panel to select the language
for the LCD, then touch the OK button.
If an unintended language is displayed on the LCD, touch the Back button (I) to return to the Language selection screen.•
When it is necessary to turn off the machine
Thespecicationofthepowercorddiffersforeachcountryorregion.•
