EMBROIDERING TUTORIAL
——————————————————————————————————————————————————————————————
40
Screen overview
The basic operation flow is shown below.
In the pattern type selection screen, select a
pattern type. (Refer to page 42, 71.)
1 Touch this key to continue to the pattern
editing screen after at least one pattern has
been selected. This key is not available unless a
pattern has been previously selected.
In the pattern list screen, select the pattern.
(Refer to page 42, 72.)
1 Touch this key to return to the pattern type
selection screen.
2 Touch this key to continue to the pattern
editing screen.
In the pattern editing screen, edit the pattern.
(Refer to page 44, 73.)
1 Touch this key to return to the pattern type
selection screen and add another pattern.
2 Touch this key to continue to the embroidering
settings screen.
In the embroidering settings screen, if it is a
combined pattern, edit the entire pattern,
specify the embroidering settings and check
the embroidery area. (Refer to page 45, 75.)
1 Touch this key to return to the pattern editing
screen.
2 Touch this key to continue to the embroidering
screen.
