6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
46
KE-430FX/KE-430FS, BE-438FX
No. Setting range Setting items Default
407
Assignment to F1 key
1
1 to 999, C01 to C30
If memory switch No. 406 = 3, operation switches to the program
number which has been set.
408
Assignment to F2 key
Assignment
to F1 key
1 to 999, C01 to C30
If memory switch No. 406 = 3, operation switches to the program
number which has been set.
409
Assignment to F3 key
3
1 to 999, C01 to C30
If memory switch No. 406 = 3, operation switches to the program
number which has been set.
410
Assignment to F4 key
4
1 to 999, C01 to C30
If memory switch No. 406 = 3, operation switches to the program
number which has been set.
500
Thread nipper device
OFF OFF Disable
ON Thread nipper device can be used. (*5)
*5: The setting is enabled when memory switch No. 100 is set to “ON”, the slow start pattern is set to Lo8 or Lo9 and when
the sewing speed value is set to 1500 sti/min or more.
