UTILITY STITCHES ——————————————————————————————————————————————————————
—
98
GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX
5
Pull down the buttonhole lever as far as
possible.
1 Buttonhole lever
The buttonhole lever is positioned behind the
bracket on the buttonhole foot.
1 Buttonhole lever
2 Bracket
6
Gently hold the end of the upper thread in
your left hand, and then start sewing.
X Once sewing is completed, the machine
automatically sews reinforcement stitches,
then stops
7
Raise the presser foot lever, remove the
fabric, and then cut the threads.
8
Raise the buttonhole lever to its original
position.
Memo
● If the fabric does not feed, for example,
because it is too thick, increase the stitch
length. For details, refer to “Adjusting the
stitch length” (page 58).
1
1
2
S3_brotherE.book Page 98 Thursday, May 15, 2003 1:58 PM
