OTHER BASIC PROCEDURES
——————————————————————————————————————————————————————————————
98
2
Touch the keys to adjust the pattern to the
desired angle.
Each touch of a key rotates the pattern.
1 Shows the angle of the pattern after a key is
touched to change it.
• To return the pattern to its original angle,
touch .
3
If necessary, touch the arrow keys to adjust
the position of the pattern.
For more details, refer to page 96.
4
If necessary, touch and then touch
to check the embroidering area.
For more details, refer to page 51.
5
After making the desired changes, touch
.
The embroidering settings screen appears again.
Example: Original angle
1 Rotates 1 degree to the right
2 Rotates 10 degrees to the right
3 Rotates 90 degrees to the right
4 Rotates 90 degrees to the left
5 Rotates 10 degrees to the left
6 Rotates 1 degree to the left
7 Touch this key to close this screen.
8 Moves the pattern in the direction of the arrow
on the key.
9 Touch this key to return the pattern to its
original angle.
