RESET TO FACTORY DEFAULTS
Should you wish to have all settings reset to original factory defaults,
you may execute a master reset. Normally, this function is not used.
Press and hold the STANDBY pushbutton. “RESET ALL
PARAMETERS, INPUT 1=Y, INPUT 2=N” will show in the display.
To leave all settings as they currently are, press the TWO
pushbutton.
To reset all settings to factory defaults, press the ONE pushbutton.
WARNING: ALL personalized program settings will be lost,
including the names of each input.
The microprocessor and PROM version numbers will momentarily
be displayed, followed by ”SCANNING…”
All other pushbuttons are inoperative during this time. The 865
Integrated Amplifier will then return to normal operating mode and
initiate a power up sequence.
PROGRAMMING
4-8
