46
Chapter 5 Setting the Pedal Functions (Pedal Assign)
If You Don’t Want to Use the
Expression Pedal as a “Volume Pedal”
Use the procedure below to turn the expression pedal off.
1. Press [PEDAL ASSIGN].
2. Press PARAMETER [ ] [ ] a number of times
until you have one of the following screens displayed.
fig.05-04
3. Press [PEDAL ASSIGN] once more, to set it to “Off.”
4. To save the settings, perform the Write procedure (p.
23).
Press [EXIT] to return to the Play screen.
Settings for Using the Expression
Pedal Switch/CTL Pedal
Making Settings Instantly
(Quick Settings)
Quick Settings is a function that lets you set the most
appropriate values for related effect parameters instantly,
just by selecting the preset “pedal settings.” This greatly
reduces the hassle of selecting and setting parameters one by
one.
Pedal Settings for the Expression Pedal Switch
Select the parameter to be controlled when you press down
on the toe of the expression pedal.
• WAH Effect On/Off
• FX-2 Effect On/Off
• OD/DIST Effect On/Off
• REV/DLY Effect On/Off
• CHORUS Effect On/Off
• PARAMETRIC EQ Effect On/Off
• FX-1 Effect On/Off
• LEVEL INC
Increase the volume level gradually
• PATCH SELECT
Switch for Patch Select Mode (p.
60
)
• BYPASS Bypass On/Off
Pedal Settings for the CTL Pedal
• OD/DIST Effect On/Off
• REV/DLY Effect On/Off
• CHORUS Effect On/Off
• PARAMETRIC EQ Effect On/Off
• FX-1 Effect On/Off
• FX-2 Effect On/Off
• WAH Effect On/Off
• PATCH SELECT
Switch for Patch Select Mode (p.
60
)
• BPM (TAP) Master BPM Tap Input
• BYPASS Bypass On/Off
1. Press [PEDAL ASSIGN].
2. Press PARAMETER [ ] [ ] to display the
following screens.
