724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 91
LGB5028A User‘s Manual
Chapter 6: Configuration
6.7 MVR
The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast television application, a PC or a
television with a set-top box can receive the multicast stream. Multiple set-top boxes or PCs can be connected to one subscriber
port, which is a switch port configured as an MVR receiver port. When a subscriber selects a channel, the set-top box or PC sends
an IGMP join message to Switch A to join the appropriate multicast. Uplink ports that send and receive multicast data to and
from the multicast VLAN are called MVR source ports.
6.7.1 Configuration
The section explains how to set switch’s the MVR basic configuration and parameters.
Web Interface
To configure the MVR Configuration in the Web interface:
1. Click “Configuration,” “MVR,” “Configuration.”
2. Scroll the MVR mode to enable or disable parameters.
3. Click the “Save” button to save the setting.
4. To cancel the setting, click the “Reset” button. It will revert to previously saved values.
