A SERVICE OF

logo

Quick Start Guide
2
Hardware Overview
BiPAC 5200N/7300N
The Front LEDs
The Rear Ports
Connect the supplied
power adapter to this
jack.
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/telephone
network.
Push the WPS button to
trigger the Wi-Fi
Protected Setup function.
(5200N: Future release)
When the power is
plugged in, it will lit Red
and when the system is
ready, it will lit Green.
Lit when
connected to an
Ethernet device
.
Lit when WPS is in
progress.
(5200N:Future release)
Lit green when the
wireless connection
is established.
Lit steady when
there is a PPPoA /
PPPoE connection.
Lit when successfully
connected to an ADSL
DSLAM
connection.
Connect your computer to a
LAN port, using the included
Ethernet cable. BiPAC
7300N offers its Ethernet
port 1
as a WAN port to be
used to connect to Cable
Modems
, VDSL, fiber and
PON optic lines.(EWAN)
Press it to reset the
device or restore to
factory default
settings.
Connect the fixed
antenna-5200N;
detachable
antenna-7300N.