BENQ Corporation
7
Chapter 3. Configuration
This chapter illustrates the web-based AWL700 configuration in detail. The AWL700
Wireless LAN Router has a structured menu and a “Quick Installation Wizard” page to
help users set up their own AWL700 quickly. This chapter describes each of these menu
sections. When the AWL700 boots up at the first time, it has a default IP address
192.168.1.1 assigned to its LAN interface. In order to configure AWL700, please point
an Internet browser from the browsing host to http://192.168.1.1
and you will be
presented with the log icon in screen as shown below. You must log in with the correct
user name and password to start the AWL700 configuration in a MD5 authenticated
web session. For setting up this MD5 authenticated session, the default user name is
admin
, and initially the password is also
admin
. We strongly recommend that – you
should change the root password as described in the Admin Password section.
Once your log in is successful, you will be presented with a welcome web page. In that
page, you can proceed with AWL700 configuration or link to BenQ’s web site for
advanced information.
