Operation64
Function Description
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
Selecting On enables the function and the projector displays the grid test
pattern. It helps you adjust the image size and focus and check that the
projected image is free from distortion.
Closed
Caption
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Standby
Settings
Network
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.
Microphone
Selecting On enables the function. The projector can output the
microphone signal when it is in standby mode and all the necessary
equipment is correctly connected. See "Playing sound through the
projector" on page 19 for details.
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See "Connection" on page 17 for how to
make the connection.
Audio Pass Through
Selecting On enables the function. The projector can play sound when it
is in standby mode. Connect the correct signal cable and connect the
audio cable to the AUDIO IN jack. See "Connection" on page 17 for how
to make the connection.
Enabling this function slightly increases the standby power
consumption.
5. SYSTEM SETUP: Advanced menu
