12 MPX1000 Extender Installer/User Guide
Figure 2.2: Emerge MPX1000 HD Multipoint Extender Transmitter (Rear)
Infrared (IR) Receiver Port Captures signals from an IR remote controller for broadcast
through the extension network
Infrared (IR) Blaster Port The dual IR(tx) emitter connects to this port via a 3.5mm jack
Omni-directional Antenna Used to establish the wireless link between the transmitter and
bound receivers; Avocent offers specialized antennas for
improved distance or higher performance in certain bands. See
the Avocent web site for more information.
Front Panel Display Built into the unit; see Front Panel Display on page 45
Power (PWR) LED LED built into the unit to indicate that power is connected and
switched ON
USB Port USB type A; reserved for future use
USB
L1
Power
Serial
Media ModuleSlot
L2
Table 2.2: Rear Panel (Transmitter)
Item Description
L1 Ethernet Port RJ 45, 10/100 Mbps Ethernet for web-based management of the
MPX1000 transmitter
L2 Ethernet Port RJ 45, 10/100 Mbps Ethernet for transfer of A/V media from the
transmitter to all bound receivers
Table 2.1: Front Panel (Transmitter) (Continued)
Item Description
