Avaya, Inc. - 101 - PARTNER ACS 1600 DSL module User Guide
6. WAN configuration
This chapter details how to configure the PARTNER ACS
1600 DSL module for both data and voice operation. To do
so, you must:
Configure the datalink protocol
Configure the physical interface **
Configure ATM PVCs and ATM options (Datalink
protocol = ATM)
Configure Frame Relay DLCIs and Configure Frame
Relay options (Datalink protocol = Frame Relay)
Configure the voice path
For the PARTNER ACS 1600 DSL module , you can also use
the Quick Configuration command to configure the physical
interface. For more information, see the “Quick Configuration”
section later in this chapter.
Voice and data traffic area each carried in their own PVCs
(protocol = ATM) or DLCI (protocol = Frame Relay). The data
payload in the PVC/DLCI identifies the voice ports and you
can define up to 8 data ports.
For more information on the menus, submenus and
commands in this chapter, see the “Menu interface” chapter.
Changing the
Datalink
Protocol
To change the datalink protocol:
1. On the Main Menu, select Configure WAN.
The WAN Configuration Menu displays.
*****************************************
* WAN Configuration Menu *
*****************************************
1. Configure Datalink Protocol
2. Configure Physical Interface
3. Configure DLCIs
4. Configure FR Options
