Installation and Connection
11
Fig. 7
Slip the end of the accessory over the tip of the imager head to fix the
accessory as shown in Fig. 8.
Fig. 8
3.5 Micro SD card Installation
NOTE: Micro SD card slot provides for additional memory, but
Micro SD card is optional and not included. Different Micro SD
cards can be used to insert into the Micro SD card slot. The
maximum 16 GB of the Micro SD card can be supported.
To insert a Micro SD card into the Micro SD card slot, make sure the
contacts are facing towards slot and the angled portion of the card is
facing down. When the Micro SD card is installed, a small Micro SD
card icon will appear at the top right portion of the screen. To remove
a Micro SD card, gently push the Micro SD card inward and then
release to eject it from the card slot.
