Main Features
Front Panel Controls
1. Release Button – Press this button to release the shuttle unit.
2. 24 pin Shuttle Interface Connector – Used to connect the shuttle to the DTT7810FM.
3. Speakers for Shuttle Models DT102, DT85 and Dt7.
4. Power Button – To turn the DTT7810 FM (ON/OFF)
5. Volume Up / Down Button – Used to increase and decrease the volume level.
6. Channel Up / Down Button – Used to go to the next channel Up or Down.
7. Source Button – Select from the four (4) available sources. DVD > TV > AV > RADIO
8. Bass Boost Button – Used to increase the low bass
9. Alarm Off Button – Used to turn off the alarm. The alarm will automatically turn off after one
minute
10. Sleep Button – Used to set the DTT7810 sleep mode. The unit will turn OFF in 15, 30, 45, 60, 90,
or 120 minutes.
11. Dimmer – Used to control the brightness of the LCD display.
12. Snooze – Used to reset the alarm function for 9 minutes.
13. LCD Display Window – The LCD display is used to show the Time, Source selected, and Radio
Station.
14. IR Receiver – Allows remote control of the DTT7810 and the installed shuttle
(DT102, Dt85 or DT7).
15. Store Button – Used to set the AM/FM presets into memory.
16. Radio Tune /
Clock Set – In Standby mode these buttons are used for setting hours, minutes, and to select
from 12 and 24 hour mode.
– In operation mode these buttons are used for radio tuning Up and Down.
17. Clock Mode Button – Used to select the clock or alarm item to be set.
18. Recall Button – Used to recall the radio display and select preset stations.
19. AM / FM Button – Radio Band selector. (FM1, FM2 and AM)
frequency ( ) response.
WARNING !
TO AVOID POSSIBLE DAMAGE
TO THIS DEVICE.
DO NOT TOUCH CONNECTOR PINS
WITH METAL OBJECT
WHILE POWER ON.
POWER
BASS BOOS T
ALARM OFF SLEEP DIMMER SNOOZE
AM/FM
1
2
3
4
5
6
7 8 9 10 11 1314
15
16 17 18 1912
3
