A SERVICE OF

logo

Open as PDF
next previous
32
DVD settings
General setup page
Press SETTINGS button to enter the “General Setup Page”.
1. Select TV DISPLAY using the button, and then press to enter the submenu.
Select the TV display mode on the screen using or buttons, and press to
confirm the setting. Press the button to exit the TV DISPLAY menu.
• NORMAL/PS: The wide-screen image will be displayed on the normal TV (4:3) in its
native aspect ratio, with some part on the left and right cut off.
• NORMAL/LB: The wide-screen image will be displayed on the normal TV (4:3) in its
native aspect ratio, with black bands on upper and lower sections of the screen.
• WIDE: If the unit is connected to a wide-screen TV set, select this option. The
widescreen image will be displayed in full screen in its native aspect ratio, while
the 4:3 image will be stretched out vertically to fit in the screen.