![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/2c/82c147e7-5c8d-412a-ab29-e8b7b1ce4f4c/82c147e7-5c8d-412a-ab29-e8b7b1ce4f4c-bg51.png)
81
System Features
A/B System Selection (F51)
This feature permits you to select which Cellular sys-
tem (A or B) your phone uses. When you turn the phone
on, it remembers the last A/B setting and will scan the
radio channels based on that setting.
Leave this setting as it has been preprogrammed un-
less you have a reason to alter the system selection.
To alter the system selection:
1. Press
F
5
JKL
1
. The
current mode will be dis-
played.
2. You can change the current
mode by
or .
3. Press
F
to set.
• Auto A-System
The phone will scan the priority systems first, and then
non-priority A-systems. For more information as to how
this mode works, see Enhanced Roaming below.
•
Auto B-System
The phone will scan the priority systems first, and then
non-priority B-systems. For more information as to how
this mode works, see Enhanced Roaming below.
•
Home Only
You can place or receive calls only within your home
area or home affiliated area.
Enhanced Roaming
Cellular systems are identified by a number called Sys-
tem Identifier or SID. Your phone is equipped with a Pre-
ferred Roaming List (PRL) which can be programmed
by your Carrier to take advantage of the families of cel-
lular system (SIDs) that your Carrier owns, or has spe-
cial billing arrangements with, in different cities.
In your Home System Area, both “
” and “
Rm
” are not
displayed on your phone. Outside of the Home System
in Service Areas closely associated with your Carrier,
the phone’s display may appear the same as when op-
erating in the Home System.
In areas where your Carrier has Roaming agreements,
your phone will display a steady “
Rm
” indication. If your
display indicates a flashing “
Rm
”, you are in a cellular
system which is not associated with your Carrier (you
can still make or receive calls).
If your display indicates a flashing “
”, you may have to
change your A/B System Selection or NAM Selection in
order to obtain service. If your display indicates “
”, you
are in an area where there is no cellular service.
OK
A/B Switch F51
Auto A-System
Auto B-System