OPERATION
RX96 03/09 Operation Section 4-3
© 2009 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
RX96
Horsepower Required 30 HP Min. (Pull)
55 HP (Lift)
30 HP (Semi-Mount)
Cutting Capacity (Max.) 2-1/2”
Cutting Height 1-12”
Safety Deflector Std.
Cutting Width 97”
Overall Length 101” (Lift, Semi-Mount)
136” (Pull)
Weight (Approx.) 1634 lbs
Hitch CAT II-III and Q.H. (Lift)
Clevis (Pull)
CAT II (Hydraulic Offset Unit) (Semi-Mount)
Blade Carrier Pan
Blade Tip Speed (FPM) 17,004 (540 RPM)
16,821 (1000 RPM)
Center Gearbox Rating 120 HP
Outboard Gearbox Rating 110 HP
Output Shaft Diameter 2”
Driveline Size Cat 4
Deck Thickness 10 Ga.
Side Skirt 1/4” x 10”
Transport Width 104”
Jack Stand Std. (pull)
Overall Width 104”
Replaceable Skid Shoes Std.
Blade Overlap 4”
Tractor Static Vertical Drawbar Load Rating (Min.) 960 lbs.
e
ower
s
es
gne
or cer
a
n mow
ng app
ca
ons an
s ra
e
o cu
up
o a spec
c
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)
