30
Chatper 2 - Connections
GFR-700 Owner’s Manual
Power Connections
When all connections are complete, you’re ready to
check the voltage switch, plug in the power cable,
and power on the GFR-700.
Checking the Voltage Switch
1 To prevent damage to your equipment, make sure
the rear panel voltage switch is set correctly for
your geographic region.
• Select 120V for U.S. and Canada.
• Select 230V for EU and Australia operation.
• For other regions, check with your local au
-
thorities.
Connecting the Power Cable
1 Connect the supplied power cable to the AC input
and plug it into an electrical outlet.
Turning on the Power
1 Turn on the main power switch.
• This switch effectively connects or dis
-
connects the GFR-700 from the AC power
source.
Notes:
• For system and remote setup,
see Chapter 3.
• For operations, see Chapter 4.
Voltage
Switch
Main Power
Switch AC Input
