Appendix A: SG-1 Vendor-Specific Attributes June 30, 2006
A-10 SG1-UM-8500-03
General:
Format:
adc-avpair = "user:action=<Reject | echo | macantispoof | user_space_overwrite |
user_space_overwrite_on_next_service >">",
Example:
adc-avpair = "user:action=Reject",
user: SSC-host sub-attribute
This vendor-specific sub-attribute contains the SSC (Service Selection Center) host IP address at which the user
activated the service. By sending this information, the system gives the RADIUS a hint as to the SSC IP address.
This is used for authorization purposes. This sub-attribute is used only in service authentication requests.
General:
Format:
adc-avpair = "user:SSC-host=<SSC host IP address>,
Example:
adc-avpair = "user:SSC-host=194.90.1.15",
user: service-name sub-attribute
This vendor-specific sub-attribute contains the service name given to the connected peer. The user:service-name
sub-attribute represents the service of the currently received attributes. It is a hint given by the RADIUS. When sent
by the POPmaestro in an access-request message it implies the service requested by the user.
Operation Mode: Access-Accept message
Service-Accept message
Vendor-type: 14
Vendor-length = 2 + 11 + (4-12)
Operation Mode: Access-Request message
Service-Request message
Vendor-type: 15
Vendor-length = 2 + name length + 7-15
