66 Model 55i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
Creating a Speeddial Key Using the Aastra Web UI
Use the following procedure to set a key to function as a speeddial. The procedure
shows the softkey screens as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
2. For softkeys, select from "Key 1" through "Key 20".
or
For programmable keys, select from "Key 1" through "Key 6".
3. In the "Type" field, select Speeddial to apply to the key.
4. In the "Label" field, enter a label to apply to this key.
5. In the "Value" field, enter the phone number, extension, or speeddial prefix to
apply to this key. If you enter a speeddial prefix, you must enter the "+" character
at the end of the prefix number (for example, "123456+").
6. In the "Line" field, select a line to apply to this key.
Valid values are 1 through 9.
7. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
8. Click to save your changes.
Aastra Web UI
