1-36 CHAPTER 1: ATM AND VLAN MANAGEMENT OVERVIEW
Tasks Tool
The Tasks icon opens the Spider Tool (see Figure 1-25), that provides a
graphical display of the underlying distributed processes in the ATM and
VLAN Management application. This is only a graphical display tool used
to illustrate the underlying network-wide configuration
infrastructure/engines and their logical layout. This diagnostic tool
displays the active processes and the devices they are applied upon.
Figure 1-25 The Spider Tool
FSetup Tool
The Fast Setup Tool is a wizard that allows you to configure the
CoreBuilder 7000 through the ATM and VLAN Management application.
It is a step by step procedure that prompts you to enter the CB7000
parameters required for network management.
To use the Fast Setup Tool:
Click on the FSetup icon in the ATMvLAN Toolbar. The CoreBuilder 7000
first Fast Setup Wizard Panel is displayed. See Figure 1-26.
