Zenoah HTZ2401 Trimmer User Manual


 
36
8. Maintenance
English
leakage is found, stop using the machine and have it
repaired immediately.
Note that failing to do so may result in the
engine catching on fire.
INTAKE AIR COOLING VENT
Never touch the cylinder, muffler, or spark plugs
with your bare hands immediately after stopping
the engine. The engine can become very hot
when in operation, and doing so could result in
severe burns.
Clean the cylinder fins with compressed air or a
brush. (MA4)
If waste gets stuck and causes blockage around the
intake air cooling vent or between the cylinder fins, it
may cause the engine to overheat, and that in turn
may cause mechanical failure on the part of the
hedge-trimmer.
BLADES
Oil blades each gas tank filling (MA5).
Make sure that the blade bolts are well tightened.
The blade assembly is designed to automatically
compensate for any play between the blades.
Check the cutting edges and reform with a flat file.
(MA6)
Point :
1. Keep the end corner sharp.
2. Round the root of the edge.
3. Do not use water when using a grinder.
When mounting the blade, make sure to fasten the
spacer, washer and bolt, then fasten the nut.
(1) Bolt (2) Plate
(3) Spacer (4) Nut
IMPORTANT
WARNING
IMPORTANT
WARNING
MA4
MA5
(1)
(2)
(3)
(4)
MA6