Zenoah HEZ2602S Trimmer User Manual


 
34
every every every
25 50 100
system/compornent procedure before hours hours hours note
use after after after
fuel leaks, fuel spillage wipe out
fuel tank, air filter, fuel filter inspect/clean ✔✔ replace, if necessary
see ADJUSTING replace carburetor
idle adjusting screw
IDLING SPEED (p.28) if necessary
clean and readjust GAP: .025in(0.6~0.7mm)
spark plug
plug gap replace, if necessary
cylinder fins, intake air cooling vent clean
muffler, spark arrester, cylinder exhaust port
clean
throttle lever, ignition switch check operation
replace if
cutting parts
something's wrong
drive shaft grease
gear case grease
screws/nuts/bolts tighten/replace ✔✔not adjusting screws
cutting blade inspect/replace replace, if necessary
ENGINE
SHAFT
MAINTENANCE CHART
9. Maintenance
English