Filter
Top Products
❲
14
❳
■ CHAIN BRAKE
This machine is equipped with an automatic brake
to stop saw chain rotation upon occurrence of
kickback while in saw cutting operation. The brake
is automatically operated by inertial force which
acts on the weight fitted inside the front guard.
This brake can also be operated manually with the
front guard turned down to the guide bar.
To release brake, pull up the front guard toward the
front handle till "click" sound is heard. (F15)
Be sure to confirm brake operation on the daily
inspection.
How to confirm:
1) Turn off the engine.
2) Holding the chain saw horizontally, release your
hand from the front handle, hit the tip of the
guide bar to a stump or a piece of wood, and
confirm brake operation. Operating level varies
by bar size. (F16)
In case the brake is not effective, ask our dealer
inspection and repairing.
The engine, If being kept rotated at high speed with
the brake engaged, heats the clutch, causing a
trouble.
When the brake is operated while in operation,
immediately release your fingers from the throttle
lever and stop the engine.
IMPORTANT
7. Operation
F15
F16