Zenoah BK4310FL-S Brush Cutter User Manual


 
12
6. Fuel
Gasoline is very flammable. Avoid smoking or
bringing any flame or sparks near fuel.
•Wipe up all spills before starting the engine.
Make sure to stop the engine and allow it cool
before refueling the unit.
Keep open flames away from the area where fuel
is handled or stored.
Never use oil for 4 cycle engine use or water cooled
2-cycle engine.
Never use "FUEL WITH NO OIL (RAW GASOLINE)".
Never use fuel laced with water.
Mixed fuels which have been left unused for a period
of one month or more may clog the carburetor or
result in the engine failing to operate properly. Put
remained fuel into an air-tight container and keep it in
the dark and cool room.
Please ask for “mixed gasoline for air-cooled 2-cycle
engines” at your nearest gas station, or use fuel
made by putting unleaded gasoline for automobiles
and air-cooled 2-cycle engine oil into a mixing
container in accordance with the following ratios and
then shaking to mix well.
Mixing ratios:
When using Zenoah genuine 2-cycle oil (FC grade):
50:1 (100 ml of oil for
every 5 liters of gasoline)
When using commercially available 2-cycle oil (FB
grade):
25:1(160 ml of oil for
every 4 liters of gasoline)
IMPORTANT
WARNING