Filter
Top Products
5
■ WORKING GEAR AND CLOTHING
a. When using your brushcutter, you should wear proper
clothing and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files
2. Properly reserved fuel
3. Spare blade
4. Things to notify your working area (Rope, warning
signs)
5. Whistle (for collaboration or emergency)
6. Hatchet or saw (for removal of obstacles)
c. Never use your brushcutter when wearing pants with
loose cuffs, when wearing sandals, or when barefoot.
■ WARNING CONSIDERING HANDLING OF FUEL
a. The engine of this product is designed to run on a
mixed fuel which contains highly flammable gasoline.
You should never store cans of fuel or refill the fuel
tank in any place where there is a boiler, stove, wood
fire, electrical sparks, welding sparks, or any other
source of heat or fire which might ignite the fuel.
b. Smoking while operating the brushcutter or refilling its
fuel tank is extremely dangerous. Always be sure to
keep lit cigarettes away from the brushcutter at all
times.
c. When refilling the tank always turn off the engine first
and take a careful look around to make sure that there
are no sparks or open flames anywhere nearby before
refueling.
d. If any fuel spillage occurs during refueling, use a dry
rag to wipe up spills before turning the engine back on
again.
e. After refueling, screw the fuel cap back tightly onto the
fuel tank and then carry the brushcutter to a spot 3m
or more away from where it was refueled before
turning on the engine.
3. SAFETY PRECAUTIONS