Filter
Top Products
GB-4
BCZ4000DL / BCZ4000DW / BCZ4200CL
Model BCZ4000DL BCZ4000DW BCZ4200CL
Overall size (LxWxH) mm 1890 x 392 x 291 1890 x 660 x 496 1900 x 660 x 520
Dry weight kg 6.9 7.3 8.5
Engine Model Zenoah GZ40N
Displacement cm
3
40.1
Fuel Mixture (Gasoline 50 : Oil 1)(when using ZENOAH genuine oil)
Carburetor Diaphragm type
Ignition system Flywheel magneto (C.D.I.)
Spark plug NGK CMR7H
Fuel tank capacity L 0.75
Starter Recoil starter
Clutch Centrifugal type
Reduction ratio 1.4
Cutting head rotating direction Counter-clockwise (Operator view)
Specifications are subject to change without notice.
2. Specification
3. Warning labels on the machine
4. Symbols on the
machine
For safe operation and maintenance, symbols are
carved in relief on the machine. According to these
indications, please be careful not to make a mistake.
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled brushcutter or if you don’t observe
the proper usage written in the manual.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER
15
m
(50ft)
(1) (2) (3) (4) (5) (6) (7)
(1) Read owner’s manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) Beware of thrown objects.
(6) Warning / Attention
(7) Keep all children, bystanders and helpers 15 meters away from the machine.