Filter
Top Products
GB-4
BC251
2. Specification
3. Warning labels on
the machine
4. Symbols on
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Read owner’s manual before operat-
ing this machine.
Wear head, eye and ear protection.
Warning / Attention
Keep all children, bystanders and helpers 15
meters away from the machine.
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled brushcutter or if you don’t observe
the proper usage written in the manual.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
Model BC251
Overall size (LxWxH) mm 1810 x 330 x 390
Dry weight kg 5.4
Engine Model Zenoah GT25N4
Displacement cm
3
25.4
Fuel Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil)
Carburetor Diaphragm type
Ignition system Flywheel magneto (C.D.I.)
Spark plug NGK BPMR7A
Fuel tank capacity L 0.62
Starter Recoil starter
Clutch Centrifugal type
Reduction ratio 1.462
Cutting head rotating direction Counter-clockwise (Operator view)
Specifications are subject to change without notice.
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER