Filter
Top Products
CONTROLS
English-26
Ignition Switch
The ignition switch is placed on the driver’s control
panel and is used to start and stop the engine.
8050-140
Hour meter
8011-521
Ignition switch and hour meter
8011-508
Choke control
Hour Meter
The hour meter displays the total operating time.
It will ash CHG OIL (Change Oil) at 50 hour intervals.
The ash duration is one hour before and one hour
after the interval. The CHG OIL icon will come on
and shut off automatically. The hour meter cannot be
manually reset.
IMPORTANT INFORMATION
Do not run the starter for more than ve
seconds each time. If the engine does not
start, wait about 10 seconds before retrying.
Choke Control
The choke mode is used for cold starts in order to
provide the engine with a richer fuel mixture.
For cold starts, the control should be pulled out to its
extent.