Filter
Top Products
English-33
OPERATION
8011-788
Move steering controls to neutral and set cutting height.
Running
Release the parking brake by moving the lever 1.
downward.
Your mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without rst setting the parking brake will shut
off the engine.
Move the steering controls to the neutral 2.
position (N).
Select the cutting height by the cutting height 3.
pedal.
Engage the mower deck by pulling out the 4.
blade switch.
Move throttle control to full throttle.5.
The machine’s speed and direction are 6.
continuously variable using the two steering
controls. When both controls are in the neutral
position, the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves in a
straight line forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the
neutral position. The rotation of the right wheel
is reduced and the machine turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind the
neutral position) and carefully moving the
other steering control forward from its neutral
position.
WARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth defects
or other reproductive system damage. The
engine exhaust contains carbon monoxide,
which is a odorless, colorless, poisonous
gas. Do not use the machine in enclosed
spaces.