25
Maintenance Schedule
Maintenance Maintance Interval (hours)
Daily 25 50 100 200 250 500
Engine (4)
Check oil level X
Change oil and filter (1)
Clean the air filter’s (1) (3)
Replace air filter’s (1) (3)
Check for fuel and oil leakage X
Clean cooling flanges (1) (3)
Check cooling air inlet X
Replace fuel filter (1)
Replace plugs (1)
Hydraulics
Check oil level X
Check for oil leaks X
Change hydraulic oil (2) XX
Change oil filter (2) XX
Electrical
Check battery X
Check the safety system X
Lubricate
Left and right brakes X
Left and right motion control shafts X
Left and right deck struts X
Deck idler arm X
Pump idler arm X
Caster swivels X
Caster tires (5) X
Deck lift lever X
Throttle cable X
Choke cable X
Cutter housings X
General
Check bolts and nuts X
Check cutting deck X
Clean cutting deck (3) X
Clean pump compartment (3) X
Check tire pressure (15 psi) X
Check belts X
Check and adjust throttle cable X
Notes:
1. See engine manual for periodic maintenance.
2. Change hydraulic oil and filter after the first 250 hours or season and then every 500 hours.
3. During dusty or dry conditions cleaning and replacement should be more frequent.
4. Refer to engine manual for more information.
5. Foam filled tires or solid tires will void the warranty.
MAINTENANCE