Filter
Top Products
English-
50
MAINTENANCE
Cleaning and Washing
Regular cleaning and washing, especially
under the mower deck, will increase the
machine’s lifespan. Make it a habit to clean
the machine directly after each use (after it is
cooled), before the dirt sticks.
Avoid using a high pressure washer or steam
cleaner. Rinse at normal water pressure. Do
not spray water on the top of the mower deck.
Use compressed air to clean the top side of
mower deck. Regularly clean deck and
underside of deck, avoid spraying engine and
electrical components with water.
Check before rinsing that the fuel tank lid is
tight to avoid getting water in the tank.
Caster Wheels
Check every 200 hours. Check that wheels
rotate freely. If wheels do not rotate freely
take the unit to your dealer for service.
Foam filled tires or solid tires will void the
warranty.
Removal and installation of caster wheel
1. Remove nut and caster bolt.
2. Pull the wheel out of the fork and take
care of the sleeve.
3. Install in reverse order. Tighten caster
bolt.
Hardware
Check daily. Inspect the entire machine for
loose or missing hardware.
8011-644
Cleaning
Use protective glasses when
cleaning and washing.
1
2
3
Caster wheels
1. Nut
2. Bolt
3. Sleeve
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam
fill material to the tires. Excessive loads
created by foam filled tires will cause
premature failures.
Only use O.E.M. specified tires.