Filter
Top Products
.lV..JCATION
CH'AMGING tN&IN} 0:1('
Drain oil when engine is warm. ~emove oil drain plug and
allow oi! to drain completely. Replat;e drQin plug and
tighten securely.
s~ engine ~anual fpt. cQmplete englr'!e l.ubric8tion and
~rVjce instructions" ;.
(U'RJCAT:~N 'POINtS
,l,.UBRICATE THE PARTS,PERIODICALLY
AS,:llL~STRATED
The following points are to be lubricated every five hour~
of operation with SAE 20 weight light duty oil, uniess
otherwise noted,
1, Clutch flipper,
2, Reverse arm.
3. Depth bar linkage.
4. Wheel$
5. Master clutch control.
*6. Ge;ar housit19.
.Before operating the tiller. check the oil level in the gear
case by removing the ojl level plug. With the tiller on a level
surface or sTightly til~fJ.d back, the oil level should be (it
least to this o.penit;g or above. Every 10.15 hours check and
maintain this oil level using. a heavy duty gear oil, such as
GX-90 dr Type 47 04tboard Motor Oil (90 weight~. Drain
the gear case and refill every 25 hours, To drain the oi1 from
th~ gear case, first dr~in the oil and gas from the engine.
Then remove the drait1Plugand tilt the unit forward.
NOTE: The gear case $hould not i:!e filled completely full.
AFTER BREAK,;IN PERIOD. {FIRST 3 TO 4 HOURS OF
OPERATION} CHECK ALL BOLTS AND NUTS FDA
TIGHTNESS.
'7