Yard Machines E6A5E Snow Blower User Manual


 
6
SECTION 3: ASSEMBLING YOUR SNOW THROWER
IMPORTANT:
After assembly, service engine with
gasoline, and check oil level as instructed in the
separate engine manual packed with your unit.
NOTE:
References to right or left side of the snow
thrower are determined from behind the unit in the
operating position.
Unpacking
Remove staples or break glue on the top flaps
of the carton. Remove any loose parts included
with unit (i.e., operator’s manual, etc.).
Cut corner’s and lay end of carton down flat.
Remove packing material.
Roll unit out of carton. Check carton thoroughly
for loose parts before discarding.
Tools required for assembly
Pair of Pliers
Two adjustable wrenches
Loose parts in carton See Figure 1
Figure 1
A (2) Handles (Right and Left)
B (1) Handle Panel Assembly
C (1) Speed Selector Plate
D (1) Shift Lever
E(1)Chute Directional Control Ass’y.
F (1) Chute Assembly
(1) Hardware Pack
A
C
D
E
F
B