Yard Machines 810 Lawn Mower User Manual


 
8
Figure 3
Secure the back of the chute deflector in the same
manner. See Figure 4.
Figure 4
WARNING: Before using your lawn mower,
again refer to the Safety Section in this
manual. Always be careful.
Converting Mower To A Mulcher
Remove either the rear discharge chute assembly
or the side chute deflector from the mower as
previously instructed.
Attach the mulching plug by first placing it over the
rear bolt in the side of the deck. Then slide the
notch in the top of the mulching plug around the
shoulder bolt on the top of the deck. Slide the notch
in the side of the mulching plug around the front bolt
in side of the deck and secure using two wing nuts.
See Figure 5.
Figure 5
Replacing The Rear Discharge Chute
Slide the ribs on the discharge chute assembly
under the flange on rear panel as you insert the
side of the discharge chute under the two tabs.
See Figure 6.
Figure 6
The edge of the discharge chute assembly goes
under the shoulder bolt on deck. Push down on the
chute assembly and slide the bottom corner slots
over the bolts on side of deck.
Press down on the discharge chute assembly and
secure with wing nuts. Make certain wing nuts are
seated properly.
SECTION 4: KNOW YOUR LAWN MOWER
Read this operators manual and safety rules before
operating your lawn mower. Compare the illustrations
in Figure 7 with your lawn mower to familiarize yourself
with the location of various controls and adjustments.
Save this manual for future reference.
WARNING: The operation of any lawn
mower can result in foreign objects being
thrown into the operators eyes and causing
severe eye damage. Always wear safety
glasses while operating the mower, or while
performing any adjustments or repairs on it.
Shoulder
Bolt
Chute
Deflector
Chute
Deflector
Wing Nut
Shoulder Bolt
Mulching Plug
Wing Nuts
Ribs
Rear Panel
Tabs
Flange
Rear Discharge
Chute Assembly
Shoulder Bolt