Filter
Top Products
5
• PRIMER BULB
Push primer bulb, fully and slowly, 5 to 7 times.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
• OIL
Refer to operator's manual for the proper type of oil.
• THROWN OBJECTS CAN CAUSE SEVERE INJURY
Do not operate unit without proper attachments and guards in place.
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF OR STOP
• HOT SURFACE WARNING
Do not touch a hot muffler, cylinder or gearbox. You may get burned. These parts get
extremely hot from operation. When turned off they remain hot for a short time.
• SHARP BLADE
WARNING: Sharp blade on cutting attachment shield. To prevent serious injury, do not
touch line cutting blade.
• DO NOT USE BLADES
WARNING: To prevent serious injury, do not attach or operate the unit with any type of
blade.
• CHOKE CONTROL
A • FULL choke position.
B • PARTIAL choke position.
C • RUN position.
WARNING: The operation of any power tool can cause foreign objects to be thrown into
your eyes. This can lead to severe eye damage. Before commencing power tool operation,
always wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards,
and a full face shield when needed.