Filter
Top Products
4 Introduction
MAN0869 (04/13/2011)
SPECIFICATIONS
Width Of Cut: . . . . . . . . . . . . . . . . . . SB54S. . . . . . . . . . . . . . . . . . . . . . .54"
SB64S. . . . . . . . . . . . . . . . . . . . . . .64"
SB74C. . . . . . . . . . . . . . . . . . . . . . .74"
SB84C. . . . . . . . . . . . . . . . . . . . . . .84"
Cutting Height. . . . . . . . . . . . . . . . . . . . . . . . . 24"(S Models) , 26"(C Models)
Number of Augers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Auger Diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15"
Fan Diameter . . . . . . . . . . . . . . . . . . SB54S/SB64S. . . . . . . . . . . . . . . . .22"
SB74C/SB84C . . . . . . . . . . . . . . . .24"
Auger Flighting Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5/16" x 2"
Roller Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . #50
Chute Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 Deg.
Chute Length . . . . . . . . . . . . . . . . . . SB54S/SB64S. . . . . . . . . . . . . 24-1/4"
SB74C/SB84C . . . . . . . . . . . . . . . .29"
Operating Weight . . . . . . . . . . . . . . . SB54S. . . . . . . . . . . . . . . . . . . . 415lbs
SB64S. . . . . . . . . . . . . . . . . . . . 436lbs
SB74C. . . . . . . . . . . . . . . . . . . . 592lbs
SB84C. . . . . . . . . . . . . . . . . . . . 632lbs
PTO Horsepower Requirement: . . . . SB54S. . . . . . . . . . . . . . . . < = 25 H.P.
SB64S. . . . . . . . . . . . . . . . 15 - 35 H.P.
SB74C. . . . . . . . . . . . . . . . 30 - 50 H.P.
SB84C. . . . . . . . . . . . . . . . 35 - 60 H.P.
Tractor Hitch . . . . . . . . . . . . . . . . . . . SB54S/SB64S. . Limited CAT1 & CAT1
SB74C/SB84C . . . . . . . CAT1 & CAT2
PTO Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .540 RPM
Auger Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 RPM
Gearbox Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 0.52 Qt SAE 80W-90
GENERAL INFORMATION
Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. This equipment should never be
operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating
and maintaining your snowblower. Read it carefully. It
furnishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature due to unknown and varying
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing, but due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right,
left, forward and rearward directions. These are deter-
mined by sitting in the tractor operator's seat facing the
direction of forward travel.