Filter
Top Products
16 Assembly
MAN0561 (8/25/2006)
REAR BLADE
Remove Components from Shipping
Configuration
1. Remove nut (5), washer (6) and pull pin (7) from
top of blade.
2. Remove hitch from the blade.
Figure 12. Shipping Configuration - Rear Blade
Assemble Rear Blade
1. Rotate hitch to its upright position and slide back
onto the bolt on top of blade as shown in Figure 13.
Figure 13. Slide Hitch onto Bolt Atop Rear Blade
2. Secure with the removed nut (5), washer (6) and
pull pin (7) as shown in Figure 14.
3. Secure the hitch pins (4) facing outward with lock
washers and nuts as shown in Figure 15.
Figure 14. Hitch Attached to Rear Blade
Figure 15. Rear Blade Hitch Pin Assembly
Figure 16. Rear Blade Assembled
7
6
5
Hitch
DP4
REAR
BLADE
BOLT
5
6
7
4
1. Hitch main frame
2. Blade assembly
3. 3 x 3" Black plastic cap
4. Category 1 mounting pin
with nut and lock washer
5. 3/4" Lock nut
6. 3/4" Flat washer
7. 7/8 x 4-1/4" Pull pin
7
1
3
4
5
6
2
DP3
(Rev. 9/5/2008)