Filter
Top Products
19
WOODS
CONTROLS
Located on oil cooler bracket behind seat.
FUEL VALVES (U) - A fuel tank selector valve is
provided on oil cooler mounting bracket.The fuel tank
selector valve has three positions:
Off: The tank selector is off when the lever points to-
ward the machine. The selector should be off when-
ever the machine is transported or stands unused for
any length of time. Shutting off the fuel supply avoids
the possibility of ooding should any dirt get under
the carburetor oat needle. Leaving the tank selec-
tor in either tank position can allow severe ooding,
which may ruin the engine by diluting the oil.
Right Tank: Fuel ows from the right tank when the
selector is turned 1/4 turn toward the left, when fac-
ing the valve.
Left Tank: Fuel ows from the left tank when the
selector is turned 1/4 turn toward the right, when fac-
ing the vlave.
DFI - FULE VALVES (V)- A fuel tank selector
valve is provided on the left side behind operator's
seat.
Off: The tank selector is off when the lever points to
the front of the machine. The selector should be off
whenever the machine is transported or stands un-
used for any length of time. Shutting off the fuel sup-
ply avoids the possibility of ooding should any dirt
get under the carburetor oat needle. Leaving the
tank selector in either tank position can allow severe
ooding, which may ruin the engine by diluting the oil.
Right Tank: Fuel ows from the right tank when
the selector is turned 1/4 turn toward the rear of the
machine.
Left Tank: Fuel ows from the left tank when the
selector is turned 1/4 turn toward the left hand side of
the machine.
12 VOLT POWER OUTLET (X) - A 12 volt
power outlet is provided to operate 12 volt personal
accessories.