Filter
Top Products
4 Introduction
MAN0571 (Rev. 6/15/2007)
SPECIFICATIONS
DS1260 DSO1260 DS1440
DS1260Q DSO1260Q DS1440Q
Cutting Height (varies with tire selection) 2" - 13" 2" - 13" 2" - 13"
Cutting Width 126" 126" 144"
Overall Width 134" 134" 152"
Overall Length (Pull-Type / Mounted) 165" / 115" 135" 175" / 125"
Tractor HP 40 - 200 50 - 200 50 - 200
Tractor PTO rpm (Q=1000) 540 or 1000 540 or 1000 540 or 1000
Blade Spindle 2 2 2
Blade Overlap 4"4"4"
Number of Blades 4 4 4
Center Driveline with Slip Clutch Cat 5 Heavy Cat 5 Heavy Cat 5 Heavy
(CV - Cat 6) (CV - Cat 6)
Side Frame Thickness 1/4" 1/4" 1/4"
Weight - Pull-Type (approximate lbs) 2,643 2,750 3,062
Blade Speed (feet per minute) 540 / 1000 16,881 / 17,016 16,881 / 17,016 16,240 / 16,487
Blade Rotation --------------- Left Spindle: CCW; Right Spindle: CW ---------------
Wheel Size 15" Rims or 21" OD 21" Solid Tires 15" Rims or 21" OD
Solid Tires, Airplane Solid Tires, Airplane
Torsion Protection --------------- Slip Clutch and Flex Couplers ---------------
GENERAL INFORMATION
Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. This equipment should never be
operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating
and maintaining your cutter. Read it carefully. It fur-
nishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature due to unknown and varying
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing but, due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right
and left direction. These are determined by standing
behind the equipment facing the direction of forward
travel. Blade rotation is clockwise (right) and counter-
clockwise (left) as viewed from the top of the cutter.