Filter
Top Products
38
WOODS
ADJUSTMENTS
ARM REST HEIGHT ADJUSTMENTS
1. Remove acorn nuts 1, plastic washers 2, arm
rest 3 and second set of plastic washers 4.
2. Adjust carriage bolts 5 to desired height A, B, or
C by pushing on the carriage bolts 5 until they
are free from the locking slot, adjusting them to
the desired height and then pulling the carriage
bolts 5 into the desired locking slot A, B, or C.
Bolts must be placed into slots a like heights or
arm rest will not t.
3. Re-assemble washers 2 & 4, arm rest 3, and
acorn nuts 1 in reverse order from disassembly.
Hold carriage bolts 5 in locking slots while tight-
ening acorn nuts 1 to prevent them from falling
out of the locking slots. Tighten nuts 1 until de-
sired resistance in arm rest rotation is achieved.
A
A
B
B
C
C
1
12
4
3
2
4
5
5