Filter
Top Products
Assembly 43
MAN0962 (1/9/2012)
Figure 40. Counterweight Installation
BW126X and BW126XL Counterweight
Installation
■ The offset model is unstable without adequate
counterweight. Use counterweight box loaded with
750 lbs. of steel.
Use a suitable lifting device of sufficient capac-
ity. Use adequate personnel to handle heavy com-
ponents.
This unit may be operated with only one wing - either
right or left. With only one wing, the unit is unshielded
and unstable. When electing to operate with one wing,
you must install a counterweight box, available from
your dealer. This box has a dual purpose: it substitutes
for the shielding and for the weight of the removed
wing.
The counterweight must be installed in the following
sequence and will require at least two people. A floor
jack or a suitable lifting device will be helpful to align
the hinges when installing the hinge pin.
Refer to Figure 40.
1. Remove hinge pin (6) from center section.
1. Weight Box 750 lbs
2. Brace
3. Skid Shoe
4. Mounting plate
5. Sleeve, 1.25 x 1.5 x 3.40
6. Hinge Pin
7. Clevis Pin, 1 x 2.26
8. 1/4 x 1-1/2 Cotter Pin
9. Spring Pin, 1/4 x 1-1/2
10. 3/8 NC x 1-1/4 Hex Head Cap Screw
11. 3/8 NC x 1-1/4 Self-Tapping Screw
12. 3/8 Flat Washer
13. 3/8 Lock Washer
14. 3/8 NC Flanged Lock Nut
15. 1" Flat Washer
16. 1 x 1-7/8 x 1/4 Washer
CAUTION