Filter
Top Products
3PN-53661 (Rev. 12/96)
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
(Safety Rules continued from previous page)
J Ensure shields and guards are proper-
ly installed and in good condition. Replace
if damaged.
OPERATIONAL SAFETY
J Protective sleeves must be over hydrau-
lic hoses and securely fastened onto metal
hose fittings as shown in this manual. Re-
place if damaged or if protective sleeve is
not properly positioned or secured.
J Keep bystanders away from equip-
ment while it is in operation.
J Do not modify or alter or permit anyone
else to modify or alter the loader, loader
mounting kit, any of itscomponents or any
loader function.
J Tractor must be equipped with ROPS
or ROPS CAB and seat belt. Keep seat belt
securely fastened. Falling off tractor can
result in death from being run over or
crushed. Keep foldable ROPS systems in
“locked up” position at all times.
J Always sit in tractor seat when operat-
ing controls or starting engine. Securely
fasten seat belt, place transmission in park
or neutral, engage brake and ensure all
other controls are disengaged before
starting tractor engine.
J Before dismounting tractor or perform-
ing any service or maintenance, disengage
power to implement, lower the 3-point hitch
and all raised components to the ground,
operate valve levers to release any hydrau-
licpressure,stopengine,setparkingbrake,
remove key, and unfasten seat belt.
MAINTENANCE SAFETY
J Before dismounting tractor or perform-
ing any service or maintenance, disengage
power to implement, lower the 3-point hitch
and all raised components to the ground,
operate valve levers to release any hydrau-
licpressure,stopengine,setparkingbrake,
remove key, and unfasten seat belt.
J Your dealer can supply original equip-
ment hydraulic accessories and repair
parts. Substitute parts may not meet origi-
nal equipment specifications and may be
dangerous.
J Always wear relatively tight and belted
clothing to avoid entanglement in moving
parts. Wear sturdy, rough-soled work
shoes and protective equipment for eyes,
hair, hands, hearing and head.
J Keep all persons away from operator
control area while performing adjust-
ments, service or maintenance.
J Tighten all bolts, nuts and screws, and
check that all cotter pins are installed
securely to ensure equipment is in a safe
condition before operating.
J Ensure shields and guards are proper-
ly installed and in good condition. Replace
if damaged.
NOTES