Filter
Top Products
7PN-53661 (Rev. 12/96)
To provide clearance for mounting the 215 loader,
adjust the front tractor tires to a minimum 67” tread or
to the manufacturer’s widest recommended setting.
This also provides increased tractor stability.
SC686
67”
MINI-
MUM
Figure 3. Tire Adjustment -- 215 Loader Only
Rear Mount Attachment -- 195 Loader
Attach the front of the left rear mount (3) to the side of
the tractor frame as shown and secure with two cap
screws (14), washers (13) and lockwashers (12).
Secure the rear of the left rear mount to the tractor
with four cap screws (18) and lockwashers (17).
Repeat for opposite side. Do not tighten fasteners
until all adjustments are complete.
CM583
3
14
1312
17 18
3. Left rear mount
12. 5/8” Lockwasher
13. 5/8” Standard flat washer
14. 16mm x 2P x 35mm Hex head cap screw
17. 20mm Lockwasher
18. 20mm x 2.5P x 50mm Hex head cap screw
Figure 4. Rear Mount Attachment -- 195 Loader
Rear Mount Attachment -- 215 Loader
Attach the front of the left rear mount (3) to the tractor
frame as shown and secure with two cap screws (14),
washers (13) and lockwashers (12). Secure the rear of
the left rear mount to the tractor with four cap screws
(18) and lockwashers (17). Repeat for opposite side. Do
not tighten fasteners until all adjustments are complete.
CM684
17 18
3
12
13
14
3. Left rear mount
12. 5/8” Lockwasher
13. 5/8” Standard flat washer
14. 16mm x 2P x 35mm Hex head cap screw
17. 20mm Lockwasher
18. 20mm x 2.5P x 50mm Hex head cap screw
GR5
Figure 5. Rear Mount Attachment -- 215 Loader
Crossmember Link Attachment
Attach the crossmember link (4) to the rear mounts as
shown and secure with cap screws (11), washers
(13), lockwashers (12) and hex nuts (10). Tighten all
fasteners securely.
CM582
4
10
11
1213
4. .50 x 6.00 x 18.87” U-Link
10. 14mm x 1.5P Hex nut
11. 14mm x 1.5P x 50mm Hex head cap screw
12. 5/8” Lockwasher
13. 5/8” Standard flat washer
Figure 6. Crossmember Link Attachment