Filter
Top Products
8
8. Insert the line into the exit hole in the hub
as shown in the illustration.
9. Align the notch with the line exit hole.
10. Push the spool into the hub until it snaps
into place.
11. Pull on the line extendingoutside the h ub
to release i tfrom the notch;otherwise, the
unit will not funct ion properly.
Small
Hole
Spool
Tap
Button
Hub
Line exit hole
L
ine in Notch
USER REPLACEABLE SERVICE PARTS
Spool with 0.065″ Trimmer Line 952701663
Assist Handle 530403805
Bolt Carriage, 1/4 -20 530403886
Wing Nu t 530016152
Shield Assembly 530404076
Edge Guide 530403845
REPLACEMENT PART PART NUMBER
STORAGE
WARNING: Perform the following
steps after each use .
S St op the unit and disconnect the power
source when not in use.
S C arry the unit wi th motor stopped.
S St ore the unit so the line limiter blade can-
not cause injury.
S S tore unit and extension cord indoors in a
high, dry place out of the reach of children.
Store unit unplugged.
S S tore unit with all guards i n place. Position
unit so that any sharp object cannot acci-
dentally cause injury.