Filter
Top Products
-- 3 --
D Empty the fuel tank before storing the unit.
Useup fuelleft incarburetor by starting the
engine and letting it run until it stops.
D Do not use any accessory or attachment
other than those recommended by the
manufacturer for use with your unit.
D Donot store theunit orfuel inaclosedarea
where fuel vapors can reach sparks or an
openflamefrom w aterheaters, elec tricmo-
tors or switches, furnaces, etc.
D Store in adry area out ofreach of children.
SPECIAL NOTICE: Exposure to vibra-
tions through pr olongeduse of gasoline pow-
ered hand tools could cause blood vessel or
nerve damage in the fingers, hands, and
joints of people proneto circulation disorders
or abnormal swelling. Prolonged use in cold
weatherhas beenlink edtobloodvesseldam-
age inotherwise healthypeople.Ifsymptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue the use of this tool and seek
medical attention. An anti- vibration system
does not guarantee the avoidance of these
problems.Users who operate power tools on
a continual and regular basis must monitor
closely their physicalcondition andthecondi-
tion of this tool.
SPECIAL NOTICE: This unit is equipped
with a temperature limiting muffler and spark
arresting screen which meets the require-
ments of C aliforniaCodes 4442and4443. All
U.S. forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey, Ore-
gon, and Washington require by law that
many internal combustion engines be
equippedwithasparkarrestingscreen. Ifyou
operateinalocalewheresuch r egulationsex-
ist, youarelegallyresponsibleformaintaining
theoperating conditionoftheseparts. Failure
to do so is a violation of the law. For normal
homeowner us e,themufflerandsparkarrest-
ing screen will not require any service. After
50 hours of u se, we recommend that your
mufflerbeservicedorreplacedbyyourautho-
rized service dealer.
ASSEMBLY
NOTE:Itis normalforthe fuel filt erto rattlein
the empty fuel tank.
ASSEMBLY
WARNING: If received assembled,
repeatall stepsto ensureyourunit isproperly
assembled and all fasteners are secure.
Follow all safety information in the manual
and on the unit.
D No tools are required for assembly.
BLOWER TUBE
D Push the blower tube into the blower out -
let until it snaps into place.
Blower Tube
Blower Outlet
OPERATION
KNOW YOUR BLOWER
READ THIS INSTRUCTION MANUAL AN D SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare theillustrations with your unitto familiarize yourself with loc ations ofthe various
controls and adjustments. Save this manual for future reference.
Choke
Lever
Fuel Cap
Throttle Lever
Blower T ube
Primer Bulb