Weed Eater 545117527 Trimmer User Manual


 
3
S Do not abuse cord. Never carry the unit by
the extension cord or yank extension cord
to disconnect unit.
S Use cord retainer to preventdisconnection
of extension cord from unit and possible
damage to the unit due to plug movement
(see ATTACH THE EXTENSION CORD
TO YOUR TRIMMER in the OPERATION
section).
S Do not use the unit if the switch does not
turn theuniton andoffproperly. Repairs to
the switch must be made by your autho-
rized service dealer.
S Keep the extension cord clear of operator
and obstacles at all times. Do not expose
cords to heat, oil, water , or sharp edges.
S To avoid the possibility of electric shock,
avoid bodycontact withany groundedcon-
ductor, such as metal fences or pipes.
S Ground Fault Circuit Interrupter (GFCI)
protection should be p rovided on circuit or
outlet to be used. Receptacles are avail-
able having built-in GFCI protection and
may be used for this measure of safety.
UNIT SAFETY
S Inspect unit before u se. Replace damaged
parts. Make sure all handles, guards, and
fasteners are in place and securely fas-
tened. Parts that are damaged must be re-
pairedorreplacedby anauthor izedservice
dealer. These include head parts that are
cracked, orchipped, guards, andanyother
part that is damaged.
S Do not repair unit yourself.
S Use only 0.065 inch (1.65 mm) diameter
recommended tr imm er line (see USER
REPLACEABLE SERVICE PARTS in the
SERVICE AND ADJUSTMENTS section).
Never use wire, rope, string, etc.
S Use specified trimmer spool. Make sure
spool is properly installed and all parts are
securely fastened.
S Useonly WEEDEATERreplacementparts
and accessories as recommended.
CUTTING SAFETY
S Inspect area to b e cut. Remove objects
(rocks, broken glass, nails, wire, string,
etc.) which can be thrown or become en-
tangled in cutting head.
S Donotoverreachorstandonunstablesup-
port. Keep firm footing and balance.
S Keepthecuttingheadbelow waistlevel.Do
notraisehandles aboveyour waist.Cutting
head can come dangerously close to your
body .
S Keep away from cutting head andspinning
line.
S Use unit properly. Use only for trimming,
edging, scalping, and mowing. D o not
force unit. It will do the job better and with
less risk ofinjury attherate forwhich i twas
designed.
S Useonly indaylightoringoodartificiallight.
MAINTENANCE SAFETY
WARNING: Disconnect unit from the
power supply before performing mainte-
nance, or when changing trimmer line.
S Maintain unit according to recommended
procedures. Keep cutting line at proper
length. Follow instructions for changing
trimmer line.
S Have all service and maintenance not ex-
plained inthis manual performed by anau-
thorized service dealer to avoid creating a
hazard.
S Never douse orsquirtthe unitwith wateror
any otherliquid. Clean unitanddecals with
a damp sponge. Keep handles dry, clean,
and free from oil and grease.
S Keep the air vents clean and free of debris
toavoid overheatingthemotor. Cleanafter
each use.
TRANSPORTING AND STORAGE
S Stop the unit and disconnect the power
source when not in use.
S Carry the unit with motor stopped.
S Store the unit so the line limiter blade (on
underside of shield) cannot cause injury.
S Store unitindoors inahigh, dry placeoutof
thereachof children. Storeunitunplugged.
S Donothangunitsothat thet riggerswitchis
depressed.
DOUBLE INSULATION
CONSTRUCTION
This unit is double insulated to help protect
against electric shock. Double insulation
constructionconsistsoftwoseparate“layers”
of electrical insulation instead of grounding.
Tools built with this insulation system arenot
intended to be grounded. No grounding
means is provided on this unit, nor should a
meansofgroundingbeaddedtothisunit.Asa
result, the extension cord used with your unit
can be plugged into any standard 120 volt
electrical outlet.
Safety precautions must be observed when
operating any electrical tool. The double in-
sulation systemonly provides added protec-
tion against injury resulting from an internal
electrical insulation failure.
WARNING: All electrical repairs to
this unit, including housing, switch, m otor,
etc.,mustbediagnosedandrepairedbyqual-
ified service personnel. Replacement parts
for adouble insulated appliancemust berec-
ommendedby themanufacturer.A doublein-
sulated appliance is marked with the words
“double insulation”or “ doubleinsulated”. The
symbol(squarewithinasquare)
mayalso
be marked on the appliance. Failure to have
the unit repaired by qualified service person-
nelcancause thedoubleinsulationconstruc-
tion to become inef fective and result in seri-
ous injury.
SAVE THESE INSTRUCTIONS